Workwear

Hi-Vis

Looking for custom hi-vis with your company logo? At Xceluk, we stock 279+ hi-vis products from leading brands — all available with professional embroidery and printing. Whether you need embroidered…

252 products Get a bulk quote →

Showing 217–240 of 252 results

Need These With Your Logo?

Get a free quote for embroidery or printing on any product. No minimum order. 5-7 day turnaround.

Get a Free Quote →

Or call us: 01440 712290

Branded Hi-Vis Workwear: EN ISO 20471, Choosing Class, and What's Legal

What EN ISO 20471 actually means

EN ISO 20471 is the European standard that replaced EN 471 in 2013. It dictates how much fluorescent fabric and how much reflective tape a garment must carry to legally count as "high visibility." Three classes:

  • Class 1 — minimum visibility. Hi-vis braces, gilets without sleeves. Legal for environments where the wearer isn't exposed to traffic. Not enough for roadside or rail.
  • Class 2 — mid-range. Standard hi-vis vests and tabards. Suitable for warehouses, sites away from public traffic, and most contractor work.
  • Class 3 — maximum. Long-sleeved jackets and full coveralls with sleeve and trouser banding. Mandatory for road, rail, and any night work near vehicles. If your team is on a motorway verge, this is what they wear.

Two-piece combinations matter: if you wear a Class 2 vest with Class 1 trousers, you collectively meet Class 3 requirements. That's how most road crews are kitted.

Embroidering hi-vis without breaking the certification

This is where suppliers cut corners. Embroidering across reflective tape voids the EN ISO 20471 certification for that garment, because you've damaged the reflective surface. Legitimately certified branded hi-vis must have its logo placed on fluorescent fabric only — not on the silver tape.

We position embroidery on the chest panel or shoulder zone where reflective banding doesn't cross. If your logo is too large to fit cleanly, we'll suggest a heat-applied reflective transfer instead, which doesn't damage existing tape.

Bottom line: any embroidery on hi-vis should still photograph as a fully-banded garment. Ask your supplier to show you placement before they stitch.

Brands worth your money

For day-to-day work hi-vis, Portwest is the trade default — broad range, consistent fit, good price-quality balance. Yoko is the budget brand that doesn't feel budget; their HVS150 vest has been in continuous production for 15+ years for a reason. Beeswift sits between the two. For genuinely heavy-duty use — utility crews, rail, offshore — look at Portwest PW3 or Helly Hansen Workwear.

Frequently Asked Questions

Is hi-vis legally required for construction sites?
It's required by site rules on virtually every UK construction site, and it's required by law for anyone working on the highway (Construction Design and Management Regulations 2015 + Chapter 8 of the Traffic Signs Manual). Most main contractors mandate Class 2 minimum on site.
Can you supply hi-vis trousers and full body suits?
Yes. We stock hi-vis trousers, coveralls, bib & brace overalls, and weatherproof jackets — all to Class 2 or Class 3. Embroidery available on all of them.
What's the difference between yellow and orange hi-vis?
Both meet EN ISO 20471 if certified. Yellow is more visible against dark and natural backgrounds (woodland, asphalt). Orange is more visible against snow and bright urban backdrops. Network Rail and Highways England mandate specific colours for their work — check your site rules.
How small can I print my logo on hi-vis?
Practical minimum is about 6cm wide for embroidery. Thinner text doesn't hold detail on textured hi-vis fabric. We'll send a virtual proof before stitching.

Written by Andy Smith, founder of Xcel Print and Promotions — embroidering and printing workwear in Haverhill, Suffolk since 2004. Read more about us.