Printed Softshell Jackets for Trades Teams This Winter

Printed Softshell Jackets for Trades Teams This Winter

Last reviewed: 20 October 2026 · Written and reviewed by the Xcel Print & Promotions team

Published: 20 October 2026

For trades teams working outdoors this winter, a branded softshell jacket is one of the best workwear investments you can make. It sits in the sweet spot between a fleece and a waterproof, wind-resistant, breathable, smart enough to represent your business, and robust enough to survive a full working week. Get the spec and the decoration right and it will still look good next winter too.

Every autumn, without fail, we see the same rush at our Haverhill workshop: builders, electricians, landscapers and plumbers who’ve realised their team is heading into the cold in mismatched kit that doesn’t say anything good about their business. Softshells are invariably the answer, and not just because they look the part. Done well, a set of matching branded softshells genuinely lifts team morale and makes your crew instantly recognisable on site.

This post will walk you through everything you need to make a confident decision: fabric weight, fit, decoration method, what to send us in terms of artwork, and an honest word about who this product probably isn’t for.

What makes a softshell jacket right for winter trades work?

A softshell is a bonded stretch fabric, typically a woven outer shell bonded to a fleece or micro-fleece inner. That construction gives you four things trades teams genuinely need:

  • Wind resistance, the woven outer blocks the bite without making the jacket crinkle like a crisp packet every time you move.
  • Stretch and freedom of movement, critical when you’re reaching up into a loft, crouching behind a boiler or lifting materials.
  • Breathability, unlike a hard shell, softshell lets moisture escape when you’re working hard, so you don’t overheat and then freeze the moment you stop.
  • A professional finish, softshells look clean and purposeful in a way that a fleece or a hoodie simply doesn’t, especially when worn to quote a job or meet a client on site.

They’re not fully waterproof, that’s the honest trade-off. For heavy rain, your team needs a separate hard shell or a waterproof layer on top. But for the typical British winter, cold, grey, breezy, drizzly, a mid-weight softshell is exactly right for most outdoor trades.

Which fabric weight should you choose?

Softshells come in a range of weights, typically expressed in grams per square metre (GSM). As a rule of thumb:

  • Lighter (around 280-320 GSM), better for active roles where overheating is a risk, or for late autumn and early spring. Good for landscapers and groundworkers who rarely stop moving.
  • Mid-weight (around 340-360 GSM), the sweet spot for most trades. Enough warmth for standing on a cold rooftop or working in an unheated building, but not so heavy it restricts movement.
  • Heavier (380 GSM+), worth considering for supervisors, managers or anyone spending more time standing around than physically working.

If you’re outfitting a whole team with mixed roles, mid-weight is usually the safe default. The brands we stock, including Regatta Professional and Uneek, offer consistently good quality across this range, and we know how they wear after repeated washing because we see the same garments come back year after year for reorders.

Embroidery or printing, which is better on a softshell?

Both work well on softshells, and the choice comes down to your logo and how you want it to look.

Embroidery is our most popular choice for softshells, particularly for chest logos. It has real weight and texture, it looks premium, and it doesn’t peel, crack or fade. Embroidery genuinely suits the fabric, the stitching complements the woven outer shell rather than sitting on top of it awkwardly. For trades businesses, it signals quality in a way that customers and prospects notice. Our embroidered workwear service uses in-house embroidery machines, so we control the quality at every stage.

Printing is the better call when your logo has a lot of fine detail, gradients, or you want something large across the back, a printed back panel on a softshell is a highly visible moving billboard on site. Our printing service handles these jobs cleanly. The key is sending us the right artwork: a vector file (AI, EPS, SVG or PDF) is ideal, or a high-resolution PNG at 1000px or wider. We don’t redraw artwork, so the better your file, the better the result.

Many customers go for a combination: embroidered chest logo for the polished front-facing look, with a printed back for visibility and branding impact. We can accommodate both on the same garment.

A worked example: a five-person plumbing team kitting out for winter

To make this concrete: imagine a small plumbing business, five engineers, one manager. They want a consistent look that works on site, in customers’ homes, and when quoting new jobs.

A solid approach would be: six mid-weight softshells (sized individually, this matters, see below) in a professional navy, with the company logo embroidered on the left chest and the employee’s first name on the right chest. The manager might opt for a slightly heavier variant. Total outlay is comfortably within a small business budget, the team looks cohesive from day one, and individual naming means jackets don’t go walkabout at the end of a job.

This is the kind of order we fulfil regularly. No minimum order means you’re not forced to buy twenty when you only need six. Lead times for customised items are 7-10 working days and vary with demand. Plain stock ships faster. Delivery is £5.95 + VAT, or free on orders over £99 ex VAT. Logo digitising for embroidery is free.

What about sizing, what do trades teams actually get wrong?

Sizing is the thing that causes the most frustration after the fact. Softshells in workwear sizing often run slightly differently from high-street clothes, and individual fit matters more than it does with a loose hoodie, because softshells are fitted enough that the wrong size looks visibly off.

Our honest advice: measure your team individually rather than guessing, and check the specific size guide for the garment you’re ordering. Pay attention to chest measurement and body length. If your team works in high-visibility environments, also consider that a softshell worn over a hi-vis vest needs a bit more room, and if hi-vis is a requirement, it’s worth looking at our custom hi-vis range alongside your softshell order, or combining both. For larger site teams, our bundle deals on printed hi-vis vests, available in packs of 25, 50, 100 or 250 with the logo included at a fixed price, are particularly good value and take a lot of the admin out of large orders.

How does this fit into a broader team uniform?

A softshell works best as part of a layering system. Pair it with a hoodies/">branded hoodie underneath on the coldest days, printed t-shirts underneath in milder weather, and a hard shell waterproof on top when the weather turns serious. That gives your team flexibility without anyone looking mismatched. If you want to build out a complete work uniform rather than just a single garment, we can advise on what works together, just get in touch.

Who is a branded softshell jacket NOT right for?

Being honest: softshells aren’t for everyone. If your team works in environments where the jacket will be exposed to chemicals, sharp materials, abrasion or open flame, you need purpose-built protective workwear with the appropriate certifications, a softshell is a comfort and branding garment, not PPE. Similarly, if your team is outside in sustained heavy rain, a softshell alone won’t keep them dry. And if your budget is very tight, a simpler workwear layer might be the more practical starting point.

But for the majority of UK trades teams, plumbers, electricians, builders, landscapers, joiners, decorators, who need a smart, hard-wearing, branded outer layer that performs across a British winter, a quality softshell is a genuinely excellent choice.

Ready to order branded softshells for your team?

We’ve been dressing trades teams from our Haverhill workshop for over 20 years. No minimum order, free logo digitising, in-house embroidery and printing, so you’re dealing with one team from artwork to dispatch. If you know what you want, you can browse our personalised workwear range and go from there. If you’d rather talk it through, contact us and we’ll help you get the spec right first time.

FAQs

Can I order branded softshell jackets with no minimum order?

Yes. At Xcel Print & Promotions there is no minimum order, so you can order a single jacket or a full team set. Pricing per unit is naturally better in larger quantities, but you're never forced to over-order.

How long does it take to receive printed or embroidered softshell jackets?

Lead times for customised items are 7-10 working days and vary with demand. Plain stock ships faster. If you're planning for a specific start date, it's worth ordering with a buffer, get in touch and we can advise based on current workload.

Is embroidery or printing better for a softshell jacket logo?

Embroidery is typically the better choice for chest logos on softshells, it looks premium, lasts well and suits the fabric. Printing works better for large back designs or logos with fine detail or gradients. Many customers combine both on the same jacket.

What artwork file should I send for my logo?

A vector file (AI, EPS, SVG or PDF) is ideal. If you don't have a vector, send a high-resolution PNG at 1000px or wider. We don't redraw artwork, so the quality of your file directly affects the quality of the finished result.

Are softshell jackets waterproof enough for outdoor trades work?

Softshells are wind-resistant and water-resistant, but not fully waterproof. They're excellent for typical British winter conditions, cold, drizzly, breezy, but for sustained heavy rain your team will need a hard shell or waterproof layer on top.

Can I order softshell jackets alongside hi-vis vests for my site team?

Absolutely. We'd recommend pairing softshells with printed hi-vis vests for site teams. Our bundle deals offer packs of 25, 50, 100 or 250 printed hi-vis vests with the logo included at a fixed price, which is very cost-effective for larger crews.

Andy, Xcel Print & Promotions

Written by Andy · Founder, Xcel Print & Promotions

Xcel Print & Promotions is a family-run UK workwear, branded-clothing and print company with over 20 years' experience. We embroider and print in-house from our base in Haverhill, Suffolk, with no minimum order, so this advice comes from kitting out real teams every working day, from single tradespeople to large sites and schools.

Talk to us about your workwear or print project →

Leave a Reply

Your email address will not be published. Required fields are marked *